12 · Image Gallery

Image Gallery

A reference page collecting all OLED screen and overlay captures used throughout this manual. For the meaning and context of each screen, refer to the linked documents.

Master OLED#

Six pages that cycle when you briefly press the Master front button. For details, see the Master OLED section of Hardware Setup.

Master OLED - Switcher Info page — Switcher connection/type/slot info

Master OLED - WiFi AP page — AP mode SSID/IP

Master OLED - WiFi STA page — Router connection (Station) IP

Master OLED - Ethernet page — Wired LAN IP

Master OLED - System Info page — Version/IP/LoRa settings/battery. For IP check, see Network Connection.

Receiver OLED#

Three pages that cycle when you briefly press the Receiver front button, plus status overlays. For details, see Receiver Operation.

Pages (3 types)#

Receiver OLED - Tally page — Own camera_id highlighted + PGM/PVW

Receiver OLED - System Info page — camera_id / version / battery / RSSI

Receiver OLED - RX Stats page — RSSI / received packets / error count

Status overlays#

LIVE (PGM) overlay — Own camera is on-air, rotating dashed circle

READY (PVW) overlay — Scheduled to go on-air next, static dashes

STOPPED overlay — Invalid license. Recover by rebooting (License).

Battery Empty overlay — Voltage below 3.2V, charging required

Deep Sleep countdown — Approx. 10s countdown after Battery Empty, then sleep

HW MISMATCH overlay — Boot halted when firmware for the wrong board is detected (Troubleshooting 5.3).

Boot Screen#

Boot progress is shown on the OLED. For per-step messages and diagnostics, see the boot problem section of Troubleshooting.

Master boot progress — 12-step progress indicator

Receiver boot progress — 8-step progress indicator

Representative images

Only one representative boot progress image each is included.

Last modified —