TALLY NODE
EN
Get a Quote
Skip to content
15 · Technical Reference

Technical Reference

Specifications, defaults, and terminology in one lookup page.

Applies to the kit and the Free edition

Specifications#

ItemValue
Tally radioLoRa 868MHz or 433MHz (auto-detected), internal antenna
Network2.4GHz WiFi · Ethernet (master: W5500 RJ45) — usable together
DisplayFront OLED 128x64 (master 6 pages / receiver 3 pages)
Receiver LEDs8x rear WS2812B + diffuser · 4x front RGB
PowerUSB-C 5V · internal 18650 (BMS required)
MountingBottom 1/4" thread
Receiver supportUp to 20 per master (license Device Limit)
Web Tally clients12 (counted with live console connections)

Defaults#

ItemDefault
AP SSID / passwordAuto Tally-{MAC suffix} / 12345678 (WPA2, channel 1, max clients master 4 · Free 2)
AP device IP192.168.4.1 fixed
WiFi Station SSID / passwordHOME WIFI / 33333333
USB device IP192.168.7.1 fixed (PC gets 192.168.7.2+)
EthernetDHCP (static with empty gateway = direct link)
Switcher portsATEM 9910 (UDP) · OBS 4455 (WebSocket) · vMix 8099 (TCP) · OSEE 52381 (UDP listen)
Sync Word0x12 (18) — range 1-150
Update Speed2s (500/1000/2000/5000ms, per browser)
Receiver offline verdict90s after the last report
Restored by factory reset
A Factory Reset restores all of these defaults (06 · System Settings).

Glossary#

TermMeaning
PGM (Program)The camera on-air now — red
PVW (Preview)The camera scheduled next — green
MasterThe kit device that connects to the switcher, transmits tally wirelessly, and hosts the web console
ReceiverThe kit device mounted on cameras showing its own camera number state
Free editionFree firmware you install yourself on an ESP32-S3 module (self-installed) — web tally without receivers
camera_idThe camera number assigned to a receiver (1-20)
PositionA mapping lighting slot (1-20) to which sources are assigned
SlotA switcher connection unit (1-2) with type, IP, and port
Sync WordLoRa packet identifier separating systems on one frequency
Device LimitThe receiver quota granted by the license
Web TallyThe page that turns phones into tally monitors (/tally)
Update SpeedWeb console status polling rate (unrelated to tally)
Last modified —